Phase 2
'General' warning light 1 changes
from red to yellow.
Phase 3
The indicator and warning lights
and the rpm redline warning go
out or assume operational status,
as applicable.
The malfunction indicator lamp
only goes out after 15 seconds.
The Service due is shown for a
brief time, if appropriate.
If one of the warning or indicator
lights does not show:
WARNING
Faulty warning lights
No indication of malfunctions
Check all the telltale and warn-
ing lights.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
Retailer.
ABS self-diagnosis
BMW Motorrad ABS performs
self-diagnosis to ensure its op-
erability. Self-diagnosis starts
automatically when you switch on
the ignition.
Phase 1
Test of the diagnosis-compat-
ible system components with
the vehicle at a standstill.
ABS telltale and warning
light flashes.
Phase 2
Test of the wheel-speed
sensors as the vehicle pulls
away from rest.
ABS telltale and warning
light flashes.
ABS self-diagnosis
completed
The ABS indicator and warning
light goes out.
ABS self-diagnosis not
completed
The ABS function is not avail-
able, because self-diagnosis
did not complete. (The motor-
cycle has to reach a defined
minimum speed for the wheel
sensors to be checked: min
5 km/h)
If an indicator showing an ABS
fault appears when ABS self-dia-
gnosis completes:
You can continue to ride. Bear
in mind that the ABS function
is not available.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
Retailer.
6
54
z
Riding
To Next Page
Loading...
Need help?
General
