If the motorcycle is to re-
main abroad for a lengthy
period, you can have the display
readouts changed from miles to
kilometres or vice versa, if neces-
sary. Under these circumstances
consult a specialist workshop,
preferably an authorised BMW
Motorrad dealer.
Press button 1.
The display starts with the cur-
rent value and each time the but-
ton is pressed it moves one step
through the following sequence:
Odometer (
ODO)
Tripmeter 1 (
Trip I )
Tripmeter 2 (
Trip II)
Clock
Battery voltage
Resetting tripmeter
Switch on the ignition.
Select the desired tripmeter.
Press and hold down button 1.
The tripmeter is reset to zero.
Setting clock
Switch on the ignition.
You can make this adjust-
ment only when the motor-
cycle is at a standstill.
Select the clock.
4
29
z
Operation
To Next Page
Loading...
Need help?
General
