Replace the defective bulb.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
Turn bulb 2 clockwise to install
it in the bulb housing.
Working from the inboard side,
insert the glass into the bulb
housing and close the housing.
Install screw 1.
LED rear light
The rear light has to be replaced
if more than three of the LEDs
in the array fail. Under these cir-
cumstances consult a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Replacing number-plate
light bulbs
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
8
88
z
Maintenance
To Next Page
Loading...
Need help?
General
