BMW Motorrad ABS
OE
Deactivating ABS function
Switch on the ignition, or bring
the motorcycle to a stop.
Press and hold down ABS but-
ton 1.
ABS warning light starts to
show.
Release the ABS button within
five seconds.
The ABS function is deactiv-
ated.
ABS warning light remains
ON.
Activating ABS function
Press and hold down ABS but-
ton 1.
ABS warning light goes out;
if self-diagnosis has not
completed it starts flashing.
Release the ABS button within
five seconds.
The ABS warning light remains
off or continues to flash.
The ABS function is activated.
Instead of pressing the ABS
button, you have the option of
switching the ignition off and
then on again.
If you switch the ignition off
then on again and the ABS
light comes back on, there is a
fault in the ABS.
Mirrors
Adjusting mirrors
Turn the mirror to the correct
position.
4
33
z
Operation
To Next Page
Loading...
Need help?
General
