BMW G 650 Xmoto User Manual

Insert axle 5 until seated.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Tighten right axle clamping
screws 4 to the specified tight-
ening torque.
Front-axle retainer
10 Nm
Remove the front-wheel stand.
Install axle screw 3 and tight-
en to the specified tightening
torque.
Nut on quick-release
axle, front
80 Nm
Without operating the brakes:
firmly compress the forks and
release; repeat the procedure
several times.
Tighten left axle clamping
screws 2 to the specified
tightening torque.
Front-axle retainer
10 Nm
with OE BMW Motorrad ABS:
Seat the ABS sensor in the
holder and install screw 1 of
the ABS sensor.
Remove the auxiliary stand.
8
74
z Maintenance

BMW G 650 Xmoto Specifications

General

Displacement	652 cc
Bore x Stroke	100 mm x 83 mm
Compression Ratio	11.5:1
Max Power	53 hp (39 kW) @ 7, 000 rpm
Fuel System	Electronic fuel injection
Cooling System	Liquid cooled
Transmission	5-speed
Front Tire	120/70 ZR17
Rear Tire	160/60 ZR17
Engine Type	Single cylinder, four-stroke
Max Torque	60 Nm (44 lb-ft) @ 5, 250 rpm
Front Suspension	45 mm
Front Brake	Single disc, 2-piston caliper
Rear Brake	Single disc, 240 mm, 1-piston caliper
Fuel Capacity	9.5 l