BMW K1200GT User Manual

Lights
Switching on the side
lights
The side lights switch on
automatically when the
ignition is switched on.
The side lights place a
strain on the battery.
Do not switch the ignition
on for longer than absolutely
necessary.
Switching on the low-
beam headlight
The low-beam headlight
switches on automatically
when you start the engine.
When the engine is not
running you can switch
on the lights by switching on
the ignition and either switch-
ing on the high-beam head-
light or operating the head-
light flasher.
Switch on the high-beam
headlight
Press the top part of
switch 1 for the high-beam
headlight.
High-beam headlight
switched on.
Move switch 1 for the
high-beam headlight to the
centre position.
High-beam headlight
switched off.
Press the bottom part of
switch 1 for the high-beam
headlight.
The high-beam headlight
is switched on until you re-
lease the button (headlight
flasher).
Switching on parking
lights
Switch off the ignition.
You can switch on the
parking lights only imme-
diately after switching off the
ignition.
Press and hold down
switch 1 for the left turn
4
60
z Operation

BMW K1200GT Specifications

General

Transmission	6-speed
Final Drive	Shaft
Front Brakes	Dual 320mm discs, 4-piston calipers
Engine Type	Liquid-cooled, 4-stroke in-line four-cylinder
Displacement	1157 cc
Power	152 hp @ 9500 rpm
Torque	130 Nm @ 7750 rpm
Seat Height	820/840 mm (32.3/33.1 in) (adjustable)
Dry Weight	249 kg
Weight (Wet)	approximately 282 kg
Front Suspension	BMW Duolever
Rear Suspension	BMW Paralever
Rear Brakes	2-piston caliper