switched off. In order to en-
sure that the drain on the on-
board power supply system is
minimised, the supply to the
power socket is cut off ap-
proximately 15 minutes after
the ignition is switched off,
and it is also temporarily in-
terrupted during the start pro-
cedure.
Cable routing
The cables from the power
socket to the auxiliary device
must be routed in such a way
that they:
Do not impede the rider
Do not restrict or obstruct
the steering angle and
handling characteristics
Cannot be trapped
Incorrectly routed cables
can impede the rider.
Route the cables as
described above.
Luggage
Correct loading
Overloading and imbal-
anced loads can ad-
versely affect the motorcycle's
handling.
Do not exceed the permiss-
ible gross weight and be sure
to comply with the instruc-
tions on loading.
The maximum speed recom-
mended for riding with loaded
cases is 180 km/h. If a top-
case (OA) is fitted, the max-
imum permissible speed is
180 km/h.
Set spring preload, damping
characteristic and tyre pres-
sures to suit total weight.
Make sure that the weight
is uniformly distributed
between right and left.
Pack heavy items at the
bottom and toward the in-
board side.
Max. load in each case (left
and right): 10 kg.
Max. load in tank rucksack
5 kg.
Case
Opening cases
Turn the key to the OPEN
position in the case lock.
The case is unlocked.
6
95
z
Accessories
To Next Page
Loading...
Need help?
General
