To Next Page

To Previous Page

The seat engages with an

audible click.

Helmet holder

underneath rear seat

Helmet holder 1 is underneath

the seat.

A motorcycle helmet with chin

strap can be attached to the

helmet holder. If cases are

fitted or if the chin strap is

too short, a steel cable can

be used to secure the motor-

cycle helmet.

Using helmet holder

Make sure the ground is

level and firm and place the

motorcycle on its stand.

Removing rear seat ( 65)

The helmet catch can

scratch the panelling.

Make sure the lock is out of

the way when you hook the

helmet into position.

Use the wire rope available

as an optional extra to se-

cure the helmet to helmet

holder 1.

Install the rear seat ( 67)

Mirrors

Adjusting mirrors

Move the mirror to the de-

sired position by pressing

lightly at the appropriate

point close to the rim.

Operation

Questions and Answers:

Need help?

Do you have a question about the BMW K1200GT and is the answer not in the manual?

BMW K1200GT Specifications

General

Transmission	6-speed
Final Drive	Shaft
Front Brakes	Dual 320mm discs, 4-piston calipers
Engine Type	Liquid-cooled, 4-stroke in-line four-cylinder
Displacement	1157 cc
Power	152 hp @ 9500 rpm
Torque	130 Nm @ 7750 rpm
Seat Height	820/840 mm (32.3/33.1 in) (adjustable)
Dry Weight	249 kg
Weight (Wet)	approximately 282 kg
Front Suspension	BMW Duolever
Rear Suspension	BMW Paralever
Rear Brakes	2-piston caliper