BMW R 1200 RT Rider's Manual

General instructions
The "Maintenance" chapter de-
scribes straightforward proced-
ures for checking and replacing
certain wear parts.
Special tightening torques are lis-
ted as applicable. The tightening
torques for the threaded fasten-
ers on your vehicle are listed in
the section entitled "Technical
data".
Further information on mainten-
ance and repair work is available
from your BMW Motorrad author-
ised dealer in the form of a DVD.
Some of the work requires spe-
cial tools and a thorough know-
ledge of the technology involved.
If you are in doubt, consult a
specialist workshop, preferably
your authorised BMW Motorrad
dealer.
Toolkit
Standard toolkit
1 Screwdriver handle
2 Reversible screwdriver
blade
Phillips PH1 and Torx T25
Removing front seat
( 90).
Removing and installing
body panels.
3 Tool for oil cap
Topping up the engine
oil ( 123).
Removing rear seat
( 91).
3 Install the rear seat
( 92).
4 Open-ended spanner
Width across flats 8/10
Service toolkit
BMW Motorrad has assembled
a service toolkit that is ideal for
carrying out extended service
work (e.g. removing and installing
wheels) on this motorcycle. You
can obtain the tools set from
your authorised BMW Motorrad
dealer.
7
122
z Maintenance

BMW R 1200 RT Specifications

General

Final Drive	Shaft drive
Tires (Front)	120/70 ZR 17
Tires (Rear)	180/55 ZR 17
Displacement	1170 cc
Power	92 kW (125 hp) at 7, 750 rpm
Torque	125 Nm at 6, 500 rpm
Fuel Capacity	25 l
Seat Height	830 mm
Fuel System	Electronic fuel injection
Front Suspension	Telelever, central spring strut
Rear Suspension	Paralever, central spring strut
Front Brake	Dual 320 mm discs, 4-piston calipers
Rear Brake	Single 276 mm disc, 2-piston caliper
ABS	Standard
Wheelbase	1, 485 mm