BMW R 1200 RT Rider's Manual

In order not to damage the
cover or the mounts, disen-
gage the cover at positions 3.
WARNING
Spring preload setting and
spring-strut damping setting
not matched.
Impaired handling.
Adjust spring-strut damping to
suit spring preload.
If you want to increase spring
preload, use tool 2 (on-board
toolkit) to turn knob 1 clock-
wise.
If you want to reduce spring
preload, use tool 2 to turn
knob 1 counter-clockwise.
Basic setting of spring
preload, rear
without Dynamic ESA
OE
Turn the knob as far as it will
go counter-clockwise. (One-
up riding without luggage)
Turn the knob as far as it will
go counter-clockwise, then
back it off 10 turns in the
clockwise direction. (One-up
riding with luggage)
Turn the knob as far as it will
go clockwise. (Two-up riding
and luggage)
Seat the cover in mount 2 and
press it into mounts 1.
Damping
Adjustment
Damping must be adapted to suit
the surface on which the motor-
cycle is ridden and to suit spring
preload.
An uneven surface requires
softer damping than a smooth
surface.
An increase in spring preload
requires firmer damping, a re-
duction in spring preload re-
quires softer damping.
4
72
z Operation

BMW R 1200 RT Specifications

General

Final Drive	Shaft drive
Tires (Front)	120/70 ZR 17
Tires (Rear)	180/55 ZR 17
Displacement	1170 cc
Power	92 kW (125 hp) at 7, 750 rpm
Torque	125 Nm at 6, 500 rpm
Fuel Capacity	25 l
Seat Height	830 mm
Fuel System	Electronic fuel injection
Front Suspension	Telelever, central spring strut
Rear Suspension	Paralever, central spring strut
Front Brake	Dual 320 mm discs, 4-piston calipers
Rear Brake	Single 276 mm disc, 2-piston caliper
ABS	Standard
Wheelbase	1, 485 mm