Hold speaker cover 1 in posi-
tion and install screws 2.
Replacing LED rear light
The LED rear light can be re-
placed only as a complete unit.
Consult a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Replacing LED turn
indicators
LED turn indicators can be
replaced only as a complete
unit. Consult a specialist work-
shop, preferably an authorised
BMW Motorrad dealer.
Waveguide rings,
replacing
with daytime running light
OE
with Pro Headlight
OE
Waveguide rings are integrated
into the headlight and can be
replaced only together with the
headlight. Consult a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Replacing LED auxiliary
headlights
with LED auxiliary headlights
OA
The LED auxiliary headlights can
only be replaced as a unit; it is
not possible to replace individual
LEDs.
Consult a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Jump-starting
ATTENTION
Excessive current flowing
when the motorcycle is
jump-started
Wiring smoulders/ignites or dam-
age to the on-board electronics
If the motorcycle has to be
jump-started connect the leads
to the battery terminals; never
attempt to jump-start the en-
gine by connecting leads to the
on-board socket.
ATTENTION
Contact between crocodile
clips of jump leads and
vehicle.
Risk of short-circuit
Use jump leads fitted with fully
insulated crocodile clips at both
ends.
7
147
z
Maintenance
To Next Page
Loading...
Need help?
General
