ASC self-diagnosis not
completed
slow-flashes.
Possible cause:
ASC self-diagnosis not
completed
The ASC function is not avail-
able, because self-diagnosis
did not complete. (The motor-
cycle has to reach a defined
minimum speed for the wheel
sensors to be checked: min
5 km/h)
Pull away slowly. Bear in mind
that the ASC function is not
available until self-diagnosis has
completed.
ASC switched off
ASC warning light flashes.
Possible cause:
The rider has switched off the
ASC system.
Switch on ASC.
ASC fault
ASC warning light flashes.
Possible cause:
The ASC control unit has detec-
ted a fault. The ASC function is
not available.
You can continue to ride. Bear
in mind that the ASC function
is not available. Bear in mind
the more detailed information
on situations that can lead to
an ASC fault ( 118).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ESA fault
lights up yellow.
appears on the display.
Possible cause:
The ESA control unit has detec-
ted a fault. In this condition, the
motorcycle has too much damp-
ing and is uncomfortable to drive,
especially on roads in poor con-
dition.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Tyre pressure outside
permitted tolerance
with tyre pressure monitoring
(RDC)
OE
3
38
z
Status indicators
To Next Page
Loading...
Need help?
General
