Mirrors
Adjusting mirrors
Turn the mirror to the desired
position.
Adjusting mirror arm
Push protective cap 1 up
the mirror arm to expose the
threaded fastener.
Loosen lock nut 2.
Turn the mirror arm to the ap-
propriate position.
Tighten the locknut to the spe-
cified tightening torque, while
holding the mirror arm to en-
sure that it does not move out
of position.
Mirror with lock nut to
adapter
22 Nm (Left-hand thread)
Push protective cap 1 over the
threaded fastener.
Headlight
Headlight adjustment for
right-hand or left-hand
traffic
This motorcycle has a
symmetric-beam low-beam
headlight. If the motorcycle
is ridden in a country where
the opposite rule of the road
applies, its symmetric low-
beam headlight means that
no measures are necessary to
prevent the headlight beam from
dazzling oncoming traffic.
Headlight beam throw and
spring preload
Headlight beam throw is gener-
ally kept constant when spring
preload is adjusted to suit load.
Headlight beam throw is set cor-
rectly ex-works.
6
120
z
Adjustment
To Next Page
Loading...
Need help?
General
