Automatic daytime riding
light
NOTICE
The changeover between
daytime riding light and low-
beam headlight including front
side lights can be effected
automatically.
WARNING
The automatic daytime rid-
ing light does not replace the
personal assessment of the
light conditions
Risk of accident
Switch off the automatic day-
time riding light in poor light
conditions.
Navigate to Settings,
Vehicle settings, Lights
and switch on the Auto.
daytime light function.
The indicator light for the
automatic daytime riding
light lights up.
If the ambient brightness de-
creases below a certain value,
the low beam headlight is auto-
matically switched on (e.g. in a
tunnel). When sufficient ambi-
ent brightness is detected, the
daytime riding light is switched
back on.
The indicator light for the
daytime riding light shows if
the daytime riding light is active.
Manual operation of the
light when the automatic
system is switched on
If you press the button for
the daytime riding light, the
automatic daytime riding light
is switched off and the low-
beam headlight and front side
lights are switched on (e. g.
when you ride into a tunnel,
and the response of the auto-
matic daytime riding light to
the change in ambient bright-
ness is delayed). The auxiliary
headlight switches on again
when the daytime riding light is
switched off.
If you press the button again
the automatic daytime riding
light is reactivated, in other
words the daytime riding light
is switched on again when am-
bient light is bright enough.
Hazard warning lights
Operating hazard warning
flashers
Switch on the ignition ( 64).
NOTICE
The hazard warning flashers
place a strain on the battery.
Do not use the hazard warning
flashers for longer than absolutely
necessary.
4
76
z
Operation
To Next Page
Loading...
Need help?
General
