ATTENTION
Effect of road salt intensified
by warm water
Corrosion
Use only cold water to wash off
road salt.
ATTENTION
Damage due to high water
pressure from high pressure
cleaners or steam cleaners
Corrosion or short circuit, dam-
age to labels, seals, hydraulic
brake system, electrical system
and the motorcycle seat
Exercise restraint when using
a steam jet or high pressure
cleaning equipment.
Cleaning easily
damaged components
Plastics
ATTENTION
Use of unsuitable cleaning
agents
Damage to plastic surfaces
Do not use cleaning agents
that contain alcohol, solvents or
abrasives.
Do not use insect-remover
pads or cleaning pads with
hard, scouring surfaces.
Trim panel components
Clean trim panel components
with water and BMW Motorrad
solvent cleaner.
Plastic windscreens and
headlight lenses
Remove dirt and insects with a
soft sponge and plenty of water.
NOTICE
Soften stubborn dirt and insects
by covering the affected areas
with a wet cloth.
Clean with water and
sponge only.
Do not use any chemical
cleaning agents.
TFT display
Clean the TFT display with warm
water and washing-up liquid.
Then dry it with a clean cloth,
e.g. a paper towel.
Chrome
Carefully clean chrome parts with
plenty of water and motorcycle
cleaner from the BMW Motorrad
Care Products range. This is par-
ticularly important to counter the
effects of road salt.
11
205
z
Care
To Next Page
Loading...
Need help?
General
