Consult a specialist workshop,
preferably an authorised
BMW Motorrad retailer.
Side stand monitoring is
faulty
Side stand monitor-
ing faulty. Onward
journey possible. Engine
stop. when stationary!
Have checked by workshop.
Possible cause:
The side-stand switch or its wir-
ing are damaged.
Consult a specialist workshop,
preferably an authorised
BMW Motorrad retailer.
ABS self-diagnosis not
completed
ABS indicator and warning
light flashes.
Possible cause:
ABS self-diagnosis not
completed
The ABS function is not avail-
able, because self-diagnosis
did not complete. (The motor-
cycle has to reach a defined
minimum speed for the wheel
speed sensors to be checked:
5 km/h)
Pull away slowly. Bear in mind
that the ABS function is not
available until self-diagnosis has
completed.
ABS fault
ABS indicator and warning
light comes on.
Limited ABS availab-
ility! Onward journey
possible. Ride carefully
to next specialist work-
shop.
Possible cause:
The ABS control unit has
detected a fault. The partially
integral function and the
Dynamic Brake Control function
have failed. The ABS function is
available, subject to restrictions.
You can continue to ride. Bear
in mind the more detailed in-
formation on certain situations
that can lead to an ABS fault
message ( 146).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
retailer.
ABS failed
ABS indicator and warning
light comes on.
ABS failure! Onward
journey possible.
Ride carefully to next
specialist workshop.
3
56
z
Status indicators
To Next Page
Loading...
Need help?
General
