Bogen QUANTUM VOIP series User Manual

8-13
Software Updates
Software Updates
5
The VoIP Speaker software can be updated by using Quantum
Commander or VoIP Speaker Configuration.
NOTE: To update all VoIP Speakers, use Quantum Commander.
✍
5.1
Software Update using Quantum Commander
Use the following steps to update the VoIP
Speaker software in all speakers, using
Quantum Commander:
1. Log in to Quantum Commander.
2. On the toolbar, select:
Tools/>Download/>Software -
All Speakers to update all VoIP Speakers
(Figure 5-1).
3. The Confirm – Download Software dialog
box (Figure 5-2) will be displayed. Then Click
“Yes” to continue.
(Fig. 5-1)
(Fig. 5-2)
4. The Software Download dialog box (Figure
5-3) will be displayed. Click on Browse to
locate the folder that contains the VoIP
Speaker software.
(Fig. 5-3)
5. Select the file named: ipspkr_x.x.x.tar.gz,
then click Download (Figure 5-4) to initiate
the software download to all VoIP Speakers.
NOTE: The x.x.x is replaced in the actual file
name with the VoIP Speaker version number.
(Fig. 5-4)
✍
A. UPDATE VIA WEB-BROWSER

Bogen QUANTUM VOIP series Specifications

General

Brand	Bogen
Model	QUANTUM VOIP series
Category	Speakers
Language	English