✍
5.1
Software Update using Quantum Commander
B. UPDATE VIA SOFTWARE DOWNLOAD
The new standalone Java application version of Quantum Commander includes an enhanced
software update feature. Software Update can now be used to download new software to devices
and automatically reboot devices after they have received updated software. The Software
Update feature tracks device states through the process of receiving software, rebooting, and
reboot completion.
NOTE: Refer to Sections 7.1 and 7.2 to Install and Login to the standalone Java application.
To update software for all VoIP Speakers in your network, follow these instructions:
1. Log into the Quantum Commander using
the standalone Quantum Commander Java
application
(Figure 5-9)
. Click Submit.
(Fig. 5-9)
2. In the Quantum Commander application,
from the “Tools-> Download”Menu, select
“Software –All Speakers”
(Figure 5-10)
.
(Fig. 5-10)
4. A confirmation dialog box will be
displayed
(Figure 5-12)
. Click Yes
to proceed with the software update.
(Fig. 5-12)
3. The Software Download dialog box will then
prompt you for a valid filename for the VoIP
Speaker software
(Figure 5-11)
.
Valid format for speaker software filename
is ipspkr_x.x.x.tar.gz where the x.x.x is
replaced with the version number.
(e.g., ipspkr_1.0.0.tar.gz). Click Download.
(Fig. 5-11)
8-15
Software Updates
To Next Page
Loading...
Need help?
General
