Conettix Ethernet Communication Module Table of contents | en 3
Bosch Security Systems, Inc. Installation and Operation Guide 2016.08 | 08 | F.01U.266.226
Table of contents
1
Safety 4
2
Introduction 5
2.1 About documentation 5
2.2 Bosch Security Systems, Inc. product manufacturing dates 5
2.3 Installation workflow 6
3
System overview 7
3.1 Overview 8
3.2 Bus address settings 9
4
Installation 10
4.1 Mount the module in the enclosure 10
4.2 Mount and wire the tamper switch (optional) 10
4.3 Wire to the control panel 10
5
Configuration 13
5.1 Plug and Play configuration for SDI2 or option bus control panels 13
5.2 Plug and Play configuration for SDI or option bus control panels 13
5.3 Web-based configuration 13
5.3.1 Web-based configuration log in and use 14
5.3.2 Device Information (home) page 15
5.3.3 Change and save settings using the web 15
5.3.4 Basic Network Settings page 15
5.3.5 Advanced Network Settings page 20
5.3.6 Panel Address Settings page 21
5.3.7 Encryption and Security Settings page 23
5.3.8 Maintenance page 24
5.3.9 Factory Default page 26
5.3.10 Firmware Update page 27
5.3.11 Exiting the web-based configuration pages 28
6
Maintenance and troubleshooting LEDs 30
6.1 Show the firmware version 31
7
Specifications 33
7.1 Technical specifications 33
7.2 Compatibilities 33
8
Appendix 35
8.1 Module hostname 35
8.2 Module IP address 35
8.2.1 Use DHCP to look up the IP address of a network-connected module 35
8.2.2 Use an SDI/SDI2 keypad to discover the IP address of a module 35
8.2.3 Use Auto IP with a directly connected module 36
To Next Page
Loading...
Need help?
General
