Bosch B426 User Manual

Conettix Ethernet Communication Module System overview | en 7
Bosch Security Systems, Inc. Installation and Operation Guide 2016.08 | 08 | F.01U.266.226
3 System overview
Use the B426 for bi-directional communication over an Ethernet network.
1
4
5
6
3
2
7
8
9
11
10
12
Figure3.1: B426 system connections overview
Callout ᅳ Description Callout ᅳ Description
1 ᅳ Compatible Bosch control panel 7 ᅳ Conettix D6100i Communications Receiver/Gateway and/or
Conettix D6600 Communications Receiver/Gateway (Conettix
D6600 Communications Receiver/Gateway requires 8, 9, and 10)
2 ᅳ Data bus connection between the control
panel and the module
8 ᅳ Ethernet network connection to the Ethernet adapter
(D6680/ITS-D6682/ITS-D6686) (ITS-D6682 shown) Ethernet
Network Adapter
3 ᅳ B426 9 ᅳ Conettix Ethernet Network Adapter (ITS-D6682 shown)
4 ᅳ Ethernet connection between module and
Ethernet network
10 ᅳ Connection from ITS-D6682 to the COM4 Port on the
Conettix D6600 Communications Receiver/Gateway
5 ᅳ Ethernet network, Local Area Network
(LAN), Metropolitan AreaNetwork (MAN), Wide
Area Network (WAN), or Internet
11 ᅳ Ethernet network connection between the host computer
Ethernet network interface card (NIC) and the Ethernet network
6 ᅳ Ethernet network connection to the
D6100i Communications Receiver (D6100i/
D6100IPv6)
12 ᅳ Host PC running Remote Programming Software,
Automation, or the Conettix D6200 Programming/Administration
Software

Bosch B426 Specifications

General

Brand	Bosch
Model	B426
Category	Control Unit
Language	English