Pressing [ESC] silences the beep and clears the
message for 10 minutes. If you have not turned your
system on (armed) or extended closing, the Please Close
Now message and beep reappear after 10 minutes. To
extend the window, enter the new time at which you
would like the reminder tone to begin. This time is the
new beginning of the closing window.
When you hear the warning, you can:
–
Leave before the end of the closing window by
pressing [ESC] to silence the signal, turning on the
system, and leaving.
– Stay past the scheduled end of the closing window,
by using this function to extend the closing window.
To extend closing:
1. Open the Main menu.
2. Press [1] or [ENTER] to open the On/Off menu.
3. Use [NEXT] to go to the Extend Closing menu, and
press [ENTER], or simply press [4].
4. Enter your passcode and press [ENTER].
Notice!
You cannot extend the window across the midnight
boundary. The system cannot arm if points are off-
normal.
Control Panels B92x/B91x On/Off menu | en 141
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176
To Next Page
Loading...
Need help?
General
