Send Status Report
The Send Status Report feature sends a complete
system status report to your security monitoring
company. Status reports can alert them to potential
problems.
Sending a status report:
1.
Open the Main menu.
2. Use [NEXT] to go to the Status menu option, and
press [ENTER], or simply press [2].
3. Use [NEXT] to go to the Send Status Report menu
option, and press [ENTER], or simply press [3].
4. Enter your passcode and press [ENTER]. The control
panel sends a status report to your security
company.
25.3
146 en | B92x/B91x Status menu Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.
To Next Page
Loading...
Need help?
General
