Bosch D9412GV4 User Manual

RPS
Use the RPS menu for connection to
Remote
Programming Software (RPS). Your security company
uses RPS to configure and service your security system.
RPS is intended for use by professional or licensed
installers only.
Answer
Use the Answer option to answer the phone (pick up
the phone line) to connect to
RPS.
Using the Answer menu option to answer an incoming
call from RPS:
1. Open the Main menu.
2. Use [NEXT] to go to the Actions menu option, and
press [ENTER], or simply press [3].
3. Use [NEXT] to go to the RPS menu option, and press
[ENTER], or simply press [4].
4. Press [1] or [ENTER] to reset the sensors with the
Answer option.
5. Enter your passcode and press [ENTER]. The keypad
shows RPS is connecting…. and then returns to idle
text.
26.4
26.4.1
156 en | B92x/B91x Actions menu Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.

Bosch D9412GV4 Specifications

General

Power Supply	12 VDC
Type	Control Panel
Model	D9412GV4
Manufacturer	Bosch
Operating Temperature	0°C to +49°C (+32°F to +120°F)
Compatible with	Conettix IP, GSM, GPRS, and POTS communicators