English – 25
If the eBike battery is being charged on the bike, a corresponding notifica-
tion will be displayed.
If the on-board computer is removed from the holder(4), the state of charge
that was last displayed for the battery is saved.
Starting operation of the on-board computer
u Prior to initial start-up, remove the protective film from the display
to guarantee that the on-board computer is fully functional. If the pro-
tective film remains on the display, this can impact the functionality/per-
formance of the on-board computer.
u Full functionality cannot be guaranteed for the on-board computer if
protective films are used on the display.
The Nyon is supplied with a partially charged battery. Before the first use,
the Nyon battery must be fully charged via the USB port or via the eBike sys-
tem.
It is possible to set off within a short duration (approx. 4seconds) of switch-
ing on the on-board computer. During the subsequent period, the on-board
computer will continue loading the complete operating system in the back-
ground.
Note: When you switch on the on-board computer for the first time, the on-
board computer may require a longer period of time before it is ready for
travel.
If the on-board computer is connected to a Wi-Fi network, the user will be in-
formed about the existence of a new update where applicable. Make sure to
download the update and install the latest version.
Creating a user ID
In order to be able to use all the functions of the on-board computer, you
must register online.
With a user ID, you can analyze your ride data, plan offline routes and trans-
fer these routes to the on-board computer.
You can set up a user ID via your Bosch eBike Connect smartphone app or
simply at www.eBike-Connect.com. Enter the details required for registra-
tion. The Bosch eBike Connect smartphone app is available to download
free of charge from the AppStore (for Apple iPhones) or from the Google
Play store (for Android devices).
Bosch eBike Systems 1 270 U20 Nen | (02.10.2020)