English – 57
<My eBike> menu item
Upon initial installation of the app, a connection between the app and the
on-board computer is established via this menu item.
To achieve this, select <Add new eBike device> and follow the instruc-
tions.
Once successfully linked, the currently connected on-board computer and
its associated eBike components will be displayed.
The eBikes that were connected with Kiox or Nyon will be displayed.
If the on-board computer has already been fitted on at least two different
eBikes, these will be displayed here and can be selected. Otherwise, no se-
lection is possible. For each eBike, the name can be changed or the eBike
can be deleted from the selection list.
<Shop> menu item
If you are using Nyon, you have the option of expanding the functionality of
your on-board computer with the <Shop> menu item in terms of premium
functions.
<Custom riding modes>
With this extension, four different riding modes can be configured. This
means that, for each of the four riding modes, the assistance level of the mo-
tor support can be set depending on the speed at four points.
You can configure four different riding modes however you like.
When setting, five definable checkpoints or steps are available to you. For
the middle three points, you can select any performance assistance required
for a certain speed. For the left exterior point, only the performance assis-
tance can be changed (speed is fixed at 0km/h). For the right exterior point,
Bosch eBike Systems 1 270 U20 Nen | (02.10.2020)
To Next Page
Loading...
Need help?
General
