8/104 About this documentation
Bosch Rexroth AG, A4... with HS5E pilot control valve/Series 3x, RE 92076-01-B/10.2017
Safety instructions are set out as follows:
SIGNAL WORD
Type and source of danger!
Consequences of noncompliance
▶ Measures to prevent danger
• Warning sign: draws attention to the danger
• Signal word: identifies the degree of the danger
• Type and source of danger: indicates the type and source of the danger
• Consequences: describes what occurs if the safety instructions are not complied with
• Precautions: states how the danger can be avoided
Table 2: Hazard classes as defined in ANSI Z535.6
Warning sign, signal word Meaning
DANGER
Identifies a dangerous situation that will result in death
or serious injuries if it is not avoided.
WARNING
Identifies a dangerous situation that may result in death
or serious injuries if it is not avoided.
CAUTION
Identifies a dangerous situation that may result in minor
to moderate injuries if it is not avoided.
NOTICE
Property damage: The product or the environment may get
damaged.
1.3.2 Symbols
The following symbols indicate information that is not safety-relevant but increases
understanding of the documentation.
Table 3: Meaning of the symbols
Symbol Meaning
If this information is disregarded, the product cannot be used and/or
operated to the optimum extent.
▶
Single, independent action
1.
2.
3.
Numbered instruction:
The numbers indicate that the actions must be completed one after
the other.
To Next Page
Loading...
Need help?
General
