86/104 Disposal
Bosch Rexroth AG, A4... with HS5E pilot control valve/Series 3x, RE 92076-01-B/10.2017
12 Disposal
Careless disposal of the axial piston unit, the hydraulic fluid and the packaging
material can result in environmental pollution.
Observe the following points when disposing of the axial piston unit:
1. Completely drain the axial piston unit of hydraulic fluid.
2. Dispose of the axial piston unit and packaging material in accordance with
the national regulations in your country.
3. Dispose of the hydraulic fluid according to the national regulations in your
country. Also observe the applicable safety data sheet for the hydraulic fluid.
4. Disassemble the axial piston unit into its individual parts and properly recycle
these parts.
5. For example, separatethe parts into:
– Castings
– Steel
– Aluminum
– Non-ferrous metal
– Electronic waste
– Plastic
– Seals
13 Extension and conversion
Do not modify the axial piston unit or its assembled parts. This includes also the
change of the setting screws or the wiring.
Changes to settings on the customer side should only be made using the product-
specific setting instructions.
The warranty from Bosch Rexroth only applies to the product configuration as
delivered. The warranty is void if the unit is modified or extended.
Setting screws are protected against unauthorized resetting by means of tamper-
proof caps. Removal of the tamper-proof cap will void the warranty. If you need to
change settings, contact your Bosch Rexroth service partner (for the address, see
Chapter10.5 “Spare parts” on page81.
To Next Page
Loading...
Need help?
General
