Bosch REXROTH A4VSO User Manual

98/104 Technical data
Bosch Rexroth AG, A4... with HS5E pilot control valve/Series 3x, RE 92076-01-B/10.2017
15.2 Environmental compatibility for the areas EMC, clime and
mechanical load
Type HS5E
Mechanical loading: sine
test according to
DIN EN 60068-2-6
10 … 2000 Hz/maximum of 10g/10
cycles/3 axes
Mechanical loading:
Noise check according
to DIN EN 60068-2-64
20 … 2000 Hz/10g RMS/30g peak/30
min/3 axes
Mechanical loading:
Transport shock
according to
DIN EN 60068-2-27
15g/11ms/3 axes
Electromagnetic
compatibility
(EMC)
▶ EN 61000-6-2 / EN
61000-6-3
– EN 61000-4-2 ESD
– EN 61000-4-4 burst
– EN 61000-4-5 surge
– EN 61000-4-6
HF
line-conducted
– EN 55016-2-1
radio interference
voltage
10 kV CD/15 kV AD with BWK B
2 kV with BWK B
0.5 kV (sym./asym.) with BWK B
10 Veff (150 kHz … 80 MHz) with
BWK A
0.15 … 30 MHz, Class A, EN 55022
Maximum relative
humidity
(non-condensing)
95%
Design of electronics Integrated on pilot valve (OBE)
Electrical connection See page92, below
Type of protection
according to EN 60529
Pump including
pilot valve
IP 65 with mounted and locked plug-
in connectors
Notice: The information about mechanical loading only refers to components
containing electronics, i.e. the HS5E pilot control valve, HM20 and the VT-SWA-Lin.

Bosch REXROTH A4VSO Specifications

General

Brand	Bosch
Model	REXROTH A4VSO
Category	Water Pump
Language	English