1070 072 449-102 (01.12) GB
1-2 Safety Instructions
1.2 Qualified Personnel
The requirements for qualified personnel depend on the qualification pro-
files described by ZVEI (central association of the electrical industry) and
VDMA (association of German machine and plant builders). Please refer
to the following publication (in German):
Weiterbildung in der Automatisierungstechnik
edited by: ZVEI und VDMA
MaschinenbauVerlag
Postfach 71 08 64
60498 Frankfurt / Germany
This manual is intended for PLC project planning engineers. This
personnel requires special knowledge of controllers.
Interventions in the hardware and software of our products, unless de-
scribed otherwise in this manual, may only be performed by Bosch's own
specifically trained personnel.
Tampering with the hardware or software, ignoring warning signs
attached to the components, or non-compliance with the warning notes
given in this manual can result in serious bodily injury or property damage.
Only electrotechnicians as recognized under IEV 826-09-1 (modified) who
are familiar with the contents of this manual may install and service the
described products.
Such personnel
• is, due to their professional training, skills and experience and based
upon their knowledge of and familiarity with applicable technical stan-
dards, capable of evaluating the work to be carried out, and of recog-
nizing possible dangers.
• has acquired, based upon several years of working in a comparable
field, a level of knowledge and skills that may be deemed equal to that
after formal professional education.
Please note our comprehensive range of training courses.
Our training center will be pleased to provide you with further information,
telephone: +49-6062-78-258.
To Next Page
Loading...
Need help?
General
