English User Guide Page 37
pro.Bose.com Installation and Operating Guide
To update the amplifier’s EQ file, select System -> Update EQ file. Same as the process to update firmware, if a newer version is
available from the drop-down list under “Latest Version,” select the update check box and click the Update button.
Figure 16. EQ Update window
Note: Between timed releases of ControlSpace
®
Designer™ software, PowerMatch
®
firmware updates and loudspeaker EQ files may
become available. Check pro.Bose.com for updates and instructions on how to load and apply these files.
Saving and Recalling Amplifier Settings (USB-only version amplifiers)
You can save amplifier settings using a PC, USB connection, and ControlSpace Designer software. This may be useful for archiving
settings made on the front panel after installation. You may also find it useful to copy settings from one PowerMatch amplifier to other
PowerMatch amplifiers.
To save front panel settings:
1. Install ControlSpace Designer software on a compatible PC.
2. Connect the PC to the amplifier using USB.
3. Start ControlSpace Designer.
4. The amplifier should automatically connect and populate into the Project Window.
5. Save the Project File by selecting File -> Save As… from the menu bar.
To replace front panel settings with a previously saved filed:
1. Start ControlSpace Designer.
2. Open the previously saved Project File by selecting File -> Open from the menu bar.
3. Connect the PC to the amplifier using USB.
4. Click the YES button when presented with a dialog box asking, “Go Online via USB?”
5. Click “Send to Device” in the Settings Transfer window (Figure 17) to push the settings to the connected amplifier.
Figure 17. Settings Transfer window
Saving and Recalling Amplifier Settings (network version amplifiers)
With any network version amplifier, you can save and update device settings within a networked system with one or more amplifiers.
This process is outside the scope of this guide. Refer to the ControlSpace Designer software documentation for details.
To Next Page
Loading...
Need help?
General