Bpt TH 345 User Manual

GB
27
T3
T2
T1
048121620
123
4
567
ON
Fig. 68
T3
T2
T1
048121620
123
4
567
ON
Fig. 69
grammed interval, press the
button or the button.
Programming in days
13.7 - Press the button twice,
figure 68.
The display shows the wording
d01 instead of the actual time.
13.8 - Press the button or
until you reach the number of days
required, which can range from 1
to 99, figure 69.
The days are counted including the
day during which the programming
option is used (so the remainder of
the day when the setting is made
counts as a whole day).
Note. To return to AUTOMATIC
mode before the expiry of the pro-
grammed interval, press the
button or the button.
In the COOLING program:
13.9 - Press the button once.
The bar under the symbol is
T3
T2
T1
048121620
123
4
567
ON
Fig. 70
enabled to confirm the fact that the
THERMOPROGRAM is not control-
ling the plant and the program
graph disappears, figure 70.
For 5 s the room temperature rea-
ding disappears and the display
reads .
For programing in hours or days,
proceed as explained for the HEA-
TING program.
14 - RESET
When you need to reset the ther-
mostat to operation after it has
been switched off due to faulty
operation or for other technical
reasons, proceed as follows:
14.1 - Remove the thermostat
from its housing.
14.2 - Press buttons R, figure 71.
14.3 - Replace the thermostat in
its housing.
This operation cancels any perso-
nalized programs, which are resto-
TH345.01 ITF 24078822 04_06 11-07-2007 8:21 Pagina 27

Bpt TH 345 Specifications

General

Brand	Bpt
Model	TH 345
Category	Thermostat
Language	English