User Manual 18
Setting a 7-Day program – Individual Days
(7-day residential or commercial programming mode only)
Available Daily Events
Residential mode: MORN, DAY, EVE, NITE
Commercial mode: OCC, UNOC
1. Press and release the PROG button.
2. Press SYSTEM to select HEAT or COOL.
3. Press or to select the day you want to program. Press NEXT.
4. Press or to adjust the hour for the first event. Press NEXT.
5. Press or to adjust the minute for the first event. Press NEXT.
6. Press or to adjust the temp for the first event. Press NEXT.
7. Press or to adjust the fan* for the first event. Press NEXT.
8. Repeat steps 4-7 for your remaining daily events.
9. If needed, repeat steps 3-8 to program additional days.
10. If needed, repeat steps 2-8 to program the opposite mode.
11. Press RETURN to exit.
* See “Programmable Fan Mode” in section 5.
To Next Page
Loading...
Need help?
General
