17 User Manual
Setting a 7-Day program – All 7 Days at Once (SpeedSet
®
)
(7-day residential or commercial programming mode only)
NOTE: Setting all 7 days at once will copy over any previously programmed individual days.
Available Daily Events
Residential mode: MORN, DAY, EVE, NITE
Commercial mode: OCC, UNOC
1.
Hold the PROG button for 3 seconds until ALL DAYS appears.
2. Press SYSTEM to select HEAT or COOL. Press NEXT.
3.
Press or to adjust the hour for the first event. Press NEXT.
4.
Press or to adjust the minute for the first event. Press NEXT.
5.
Press or to adjust the temp for the first event. Press NEXT.
6.
Press or to adjust the fan* for the first event. Press NEXT.
7. Repeat steps 3-6 for the remaining daily events.
8. If needed, repeat steps 2-7 to program the opposite mode.
9. Press RETURN to exit.
* See “Programmable Fan Mode” in section 5.
To Next Page
Loading...
Need help?
General
