Sewing the Various Built-in Decorative Patterns
Decorative sewing D-5
CHARACTER / DECORATIVE STITCHES
D
Combining patterns
a
Select the first category and pattern.
→ The selected pattern appears on the screen.
• When the sewing is started, the selected pattern is
sewn repeatedly until the sewing machine is
stopped.
b
Select the next category and pattern.
→ The combined pattern appears on the screen.
• To remove a selected pattern, press on the
operation panel. The pattern that was selected last is
removed.
c
After all of the desired patterns are selected, start
sewing.
→ The order that the patterns appear on the screen is
the order that they will be sewn.
Repeating combined patterns
When multiple stitches are combined, the sewing machine
stops when the pattern displayed on the screen has been
completed. Use the following operations to sew a combined
pattern repeatedly.
a
After the patterns have been combined, press .
→ on the LCD screen turns to , and you can
now sew the specified pattern repeatedly.
→ If pressed again, it turns to (single sewing).
• Up to 70 patterns can be combined.
• If multiple patterns have been combined, the
sewing machine stops once all the selected
patterns displayed in the LCD have been sewn. To
repeatedly sew the combined pattern, refer to
“Repeating combined patterns” on page D-5.
• The combined pattern can be stored for later use.
For details, refer to “Saving a pattern” on
page D-9.
• When you created a combined pattern using a
pattern which allows stitch width/length
adjustment and one which does not allow, you
can adjust the stitch width/length of the created
pattern. However, the changed value will be
applied only to the pattern which allows stitch
width/length adjustment.
• If repeated sewing is set, the pattern is
repeatedly sewn until the sewing machine is
stopped.
• If the sewing machine is turned off, the
repeated/single sewing setting returns to its
default setting.
To Next Page
Loading...
Need help?
General
