EasyManuals Logo

Brother 888-F52 User Manual

Brother 888-F52
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #65 background imageLoading...
Page #65 background image
Sewing Various Fabrics
Sewing S-5
SEWING ATTRACTIVE FINISHES
S
Sewing stretch fabrics
First, baste the pieces of fabric together, and then sew without
stretching the fabric.
1 Basting
For best results when sewing on knit fabrics use the stretch
stitches. Also be sure to use a needle for knits. The
recommended stitches and their stitch numbers are indicated
below.
* Stitch patterns can be selected directly by pressing the
numeric keys on the machine during preset utility stitch
mode. Refer to “Basic operations” section.
Sewing leathers or vinyl fabrics
When sewing fabrics that may stick to the presser foot such as
leathers or coated fabrics, change the presser foot to the non
stick foot*. The walking foot* is also suitable for sewing some
leathers or vinyl fabrics.
* Sold separately with some models.
1 Leather
Sewing hook-and-loop fastener tape
Make sure that the needle passes through the hook-and-loop
fastener tape by turning the handwheel and lower the needle
into the hook-and-loop fastener tape before sewing. And then,
sew the edge of the hook-and-loop fastener tape at a slow
speed.
If the needle does not pass through the hook-and-loop
fastener tape, replace the needle with the needle size for
thicker fabrics. For details, refer to “Fabric/thread/needle
combinations” in the “Basic operations” section.
1 Edge of the hook-and-loop fastener tape
Stitch
Model 4 1-05 1-06 1-13 1-14 2-13
Model 3,2
05
* 06*
13
14
*
48
Model 1
05
* 06*
11
12
*
42
Note
The walking foot can only be used with straight
or zigzag stitch patterns with reinforcement
stitches. For details, refer to “Stitch Setting
Chart” in the “Basic operations” section.
When using the walking foot, test sew on a scrap
piece of leather or vinyl that is to be used in
project to make sure foot does not leave any
marks.
1
1
CAUTION
Use only the adhesive-free hook-and-loop
fastener tape which is designed for sewing.
When the glue adheres to the needle or the
bobbin hook race, it may cause malfunction.
If the hook-and-loop fastener tape is sewn with
the thin needle (65/9-75/11), the needle may
bend or break.
Note
Before sewing, baste together the fabric and the
hook-and-loop fastener tape.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother 888-F52 and is the answer not in the manual?

Brother 888-F52 Specifications

General IconGeneral
BrandBrother
Model888-F52
CategorySewing Machine
LanguageEnglish

Related product manuals