Brother CS5055PRW User Manual

3 - 68
Feed and rotary module
Application of Assembly
2 Attachment of Feed arm B assy
1. Set the polyester slider 2 and the feed arm B assy. 3 to the shaft of the
feed arm A assy. 1, and then attach the retaining ring CSTW-3.5.
Lubricate the feed arm A assy. shaft with FBK OIL
RO 100.
1-2 drops
XC8388***
Lubricate the feed arm B assy. shaft with FBK OIL
RO 100.
1-2 drops
XC8388***
3
Retaining ring CSTW-3.5
1
2
3 Attachment of Feed arm A assy
1. Insert the feed arm A assy. 1 from the back side of the base plate assy.,
and then set the feed regulator slide shaft 3 of the feed arm B assy. 2 to
the groove of the feed adjuster 4.
2. Insert the horizontal feed shaft 5 into the feed arm A assy. 1, the
“washer, thrust 6” and the base plate assy. from the right side, and then
align the screw hole on the feed arm supporter shaft 7, and then attach it
with the screw 1.
3. Insert the “washer, thrust 8” and the set collar 9 into the horizontal feed
shaft 5, and then attach it with the screw 2.
*Key point
• Attach the feed arm A assy. 1, the “washer, thrust 6” and the
“washer, thrust 8” so that it can sandwich with the base plate
assy. and the set collar 9.
• Check that it is not a wobble, and it moves smoothly.
Apply OILER to the 2 sections where the
horizontal feed shaft is inserted in feed arm A.
Each 1-2 drops
XZ0206***
1
Torque
0.78 – 1.18 N·m
2
Torque
0.78 – 1.18 N·m
4
3
12
1
5
1
86
9
2
5
7
Screw, Bind
M3X12
Set Screw, Socket (CP)
M4X4

Brother CS5055PRW Specifications

General

Brand	Brother
Model	CS5055PRW
Category	Sewing Machine
Language	English