Brother HL-1200 User Manual

General Information
38
3
The LED indications shown in the table below are used in the illustrations in this chapter.
LED is off.
or
LED is on.
LED is dimmed.
or
LED is blinking.
LEDs Machine Status
Sleep
The machine is in Sleep Mode (Power Save mode). While the machine is in Sleep Mode, the Ready LED
( ) is dimmed, but the machine can still receive data. Receiving a print job will automatically wake up
the machine to start printing.
For more information, see Sleep Time on page 45.
Deep Sleep
The machine is in Deep Sleep Mode, and uses less power than Sleep mode. While the machine is in
Deep Sleep Mode, the Ready LED ( ) is dimmed, but the machine can still receive data. Receiving a
print job will automatically wake up the machine to start printing.
For more information, see Deep Sleep mode on page 45.
Ready
The machine is ready to print.
Printing
The machine is printing.
The Ready LED ( ) will blink at 0.5 second intervals.
Please Wait
The machine is warming up.
The Ready LED ( ) will blink at 1 second intervals.
Cooling Down
The inside of the machine is extremely hot. The machine will pause its current print job and go into
Cooling Down mode. Wait until the machine is in Ready mode.
The Ready LED ( ) will blink at 1 second intervals.
Receiving Data
The machine is either receiving data from the computer or processing data in the memory.
The Ready LED ( ) will blink at 0.5 second intervals.

Brother HL-1200 Specifications

General

Print Technology	Laser
Interface	USB 2.0
Memory	1 MB
Weight	4.6 kg
Print Speed	20 ppm
Resolution	Up to 2400 x 600 dpi
Paper Input Capacity	150 sheets
Dimensions	340 mm x 238 mm x 189 mm
Supported Operating Systems	Windows, Mac OS