Brother HL-1200 User Manual

37
3
3
Control panel 3
LEDs (Light Emitting Diodes) 3
This section refers to the two LEDs and the two buttons on the control panel.
1 Power On/Off
You can turn the machine on and off.
Press and hold down to turn the machine on.
Press and hold down to turn the machine off. All the LEDs turn off when you enable the Power Off
mode.
Also, you can use the following functions:
Current Job Cancel / All Jobs Cancel
Error recovery / Form feed
For details, see Power On/Off key on page 43
2 WiFi (HL-1210W(E) and HL-1212W only)
Press the WiFi button and launch the wireless installer on your computer. Follow the on-screen
instructions to set up a wireless connection between your machine and your network.
When the WiFi light is on, your Brother machine is connected to a wireless access point. When the WiFi
light blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless
access point.
3 Error LED ( )
The Error LED ( ) indicates that the machine is in error state.
Also, the Error LED ( ) indicates the kind of error in combination with other LEDs.
4 Ready LED ( )
The Ready LED ( ) will blink depending on the machine status.
General Information 3
1
2
3
4

Brother HL-1200 Specifications

General

Brand	Brother
Model	HL-1200
Category	Printer
Language	English