Brother HL-1200 User Manual

Troubleshooting and other information
48
A
Toner Setting A
The printing operation varies depending on the machine setting:
 Default setting (Stop mode)
The machine will stop printing until you replace the toner cartridge with a new one when the LEDs indicate
Replace Toner.
 Continue mode
To force the machine to continue printing after the LEDs indicate Replace Toner, press seven
times to enter Continue mode (all the LEDs blink twice, and then the Ready LED ( ) turns on). The
machine will continue printing until the LEDs indicate Toner Ended.
To return to the default setting (Stop mode), press seven times (all the LEDs blink once).
NOTE
• Make sure that the top cover is closed before you change the mode.
• When the LEDs indicate an error mode, you cannot change the mode.
• If you continue printing in the Continue mode, we cannot guarantee the print quality.
• While using Continue mode the print may appear faint.

Brother HL-1200 Specifications

General

Brand	Brother
Model	HL-1200
Category	Printer
Language	English