Appendix (For USA and Canada)
C - 4
C
Laser Notices
Laser Safety (100 to 120 volt model only)
This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services
(DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of
1968. This means that the printer does not produce hazardous laser radiation.
Since radiation emitted inside the printer is completely confined within protective housings and external
covers, the laser beam cannot escape from the machine during any phase of user operation.
FDA Regulations (100 to 120 volt model only)
U.S. Food and Drug Administration (FDA) has implemented regulations for laser products manufactured on
and after August 2, 1976. Compliance is mandatory for products marketed in the United States. One of the
following labels on the back of the printer indicates compliance with the FDA regulations and must be
attached to laser products marketed in the United States.
Caution: Use of controls, adjustments or performance of procedures other than those specified in this User’s Guide may
result in hazardous radiation exposure.
Internal laser radiation
Maximum radiation power:5 mW
Wave length:770 - 810 nm
Laser class:Class 3B
MANUFACTURED:
Brother Industries, Ltd.,
15-1 Naeshiro-cho Mizuho-ku Nagoya, 467-8561 Japan
This product complies with FDA performance standards for laser products except for deviations pursuant to Laser
Notice No.50, dated July 26, 2001.
MANUFACTURED:
Brother Corporation (Asia) Ltd. Brother Buji Nan Ling Factory
Gold Garden Ind., Nan Ling Village, Buji, Rong Gang, Shenzhen, CHINA
This product complies with FDA performance standards for laser products except for deviations pursuant to Laser
Notice No.50, dated July 26, 2001.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
