Brother HL-2030 User Manual

Control panel
3 - 11
3
Network factory default setting (For HL-2070N)
If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
1 Turn off the printer.
2 Make sure that the front cover is closed and the power cord is plugged in.
3 Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until the
Toner, Drum and Paper LEDs light up. Release the Go button. Make sure that the Toner, Drum and
Paper LEDs are off.
4 Press the Go button six times. Make sure that all the LEDs light up to indicate the print server has been
reset to its default factory settings.
Network factory default setting with APIPA protocol disabled (For HL-2070N)
If you wish to reset the print server back to its factory default settings with APIPA protocol disabled, please
follow these steps:
1 Turn off the printer.
2 Make sure that the front cover is closed and the power cord is plugged in.
3 Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until the
Toner, Drum and Paper LEDs light up. Release the Go button. Make sure that the Toner, Drum and
Paper LEDs are off.
4 Press the Go button seven times. Make sure that all the LEDs light up to indicate the print server has
been reset to its default factory settings.
Note
• For more information of APIPA, see the Network User’s Guide or visit http://solutions.brother.com
• You can also disable the APIPA protocol using Web browser, BRAdmin Professional or Web
BRAdmin.

Brother HL-2030 Specifications

General

Color	No
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (black, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	16 ppm
Internal memory	8 MB
Processor model	SPARClite
Built-in processor	Yes
Powersave acoustic emission	30 dB
Sound pressure level (printing)	51 dB
Maximum print size	210 x 297 mm
Media weight (tray 1)	60 - 161 g/m2 (16 - 43 lb)
Paper tray media types	Bond paper, Envelopes, Labels, Plain paper, Recycled paper, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Letter (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Compatible operating systems	Windows 98 / Me / 2000 / XP Mac OS 9.1 - 9.2 Mac OSX 10.2.4+
Total input capacity	250 sheets
Total output capacity	100 sheets
Power consumption (standby)	70 W
Power consumption (printing)	450 W

Weight and Dimensions

Dimensions (WxDxH)	371 x 361 x 165.5 mm