About this printer
1 - 18
1
4 The printer will now automatically print all the odd-numbered pages on the other side of the paper.
Note
When you put paper in the paper tray, first empty the tray then put the printed pages in the tray, with the
printed side face up. (Do not add the printed pages to the top of a stack of unprinted paper.)
Manual duplex printing from the manual feed slot
Note
You should not use very thin or very thick paper.
1 From the Advanced tab choose the Manual Duplex printing mode, and from the Basic tab choose the
Paper Source to be Manual feed.
2 Using both hands put the paper in the manual feed slot with the side that is going to be printed on first
facing up. Follow the instructions on the computer screen. Repeat this step until you have printed all the
even-numbered pages.
3 Remove the printed even-numbered pages from the output tray and put them back into the manual feed
slot in the same order one by one. Place the paper with the side that is going to be printed on (the blank
side) face up. Follow the instructions on the computer screen.
4 Repeat Step 3 until you have printed all the odd-numbered pages on the other side of the paper.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
