5. USING THE OPERATION PANEL (BASIC OPERATIONS)
34
KE-430F, BE-438F
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
5-1. Name and function of each operation panel item
(1) Power indicator
Illuminates when the power is turned on.
(2) CAUTION indicator
Illuminates when an error occurs.
(3) RESET key
Used to reset errors.
(4) TEST key
Used to switch to test mode, or it can be used in combination with other keys to switch to other setting modes.
(5) TEST indicator
Illuminates when the TEST key (4) has been pressed.
(6) THREAD/CLAMP key
Used to switch to threading mode.
(7) THREAD/CLAMP indicator
This illuminates when the work clamp/button clamp is switched in threading mode or by using the SELECT key (14).
(8) PATTERN No. indicator
Illuminates when the SELECT key (14) is pressed to switch to the pattern number.
(9) X-SCALE indicator
Illuminates when the SELECT key (14) is pressed to switch to the X-scale setting.
(10) Y-SCALE indicator
Illuminates when the SELECT key (14) is pressed to switch to the Y-scale setting.
(11) SPEED indicator
Illuminates when the SELECT key (14) is pressed to switch to the sewing speed setting.
2395B
To Next Page
Loading...
Need help?
General
