EasyManuals Logo
Home>Brother>All in One Printer>MFC-295CN

Brother MFC-295CN User Manual

Brother MFC-295CN
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
Sending a Fax
29
5
f Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat steps e and f for each
additional page.)
Setting the scanner glass size
for faxing 5
When documents are A4 size, you need to
set the scan size to A4. If you do not, the
bottom portion of the faxes will be missing.
a Make sure you are in Fax mode .
b Press Menu, 2, 2, 0.
c Press a or b to choose A4.
Press OK.
d Press Stop/Exit.
Color fax transmission 5
Your machine can send a color fax to
machines that support this feature.
Color faxes cannot be stored in the machine’s
memory. When you send a color fax, the
machine will send it in real time (even if
Real Time TX is set to Off).
Canceling a fax in progress 5
If you want to cancel a fax while the machine
is scanning, dialing or sending, press
Stop/Exit.
Broadcasting
(Black & White only)
5
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups, Speed Dial
numbers and up to 50 manually dialed
numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
a Make sure you are in Fax mode .
b Load your document.
c Enter a number.
Press OK.
You can use either a Speed Dial, a
Group or a manually entered number
using the dial pad.
d Repeat step c until you have entered
all the fax numbers to be included in the
broadcast.
e Press Black Start.
Note
If you did not use up any of the numbers
for Groups, you can broadcast faxes to as
many as 90 different numbers.
The machine’s available memory will vary
depending on the types of jobs in the
memory and the number of locations used
for broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use dual access.
If the Out of Memory message
appears, press Stop/Exit to stop the job.
If more than one page has been scanned,
press Black Start to send the portion that
is in the machine’s memory.

Table of Contents

Other manuals for Brother MFC-295CN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-295CN and is the answer not in the manual?

Brother MFC-295CN Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)33 ppm
Print speed (color, normal quality, A4/US Letter)27 ppm
Digital senderNo
Maximum duty cycle2500 pages per month
Number of print cartridges4
Image formats supportedBMP, PCX, PNG
Maximum scan resolution19200 x 19200 DPI
Copy speed (black, normal quality, A4)22 cpm
Copy speed (color, normal quality, A4)20 cpm
FaxingMono faxing
Fax memory200 pages
Modem speed14.4 Kbit/s
Auto-redialingYes
Fax coding methodsJPEG, MH, MMR (Fax coding method), MR
Total input capacity100 sheets
Total output capacity50 sheets
Envelopes sizesC5, DL
Maximum print size216 x 356 mm
Non-ISO print media sizesExecutive
ISO A-series sizes (A0...A9)A4
Supported network protocols (IPv4)ARP, RARP, BOOTP, APIPA (Auto IP), NetBIOS/WINS, LPR/LPD, Custom Raw Port/Port9100, DNS Resolver, mDNS, FTP Server, TELNET, SNMPv1, TFTP, Scanner Port, LLTD responder, Web Services
Power requirementsAC 100-120V 50/60Hz
Networking features10/100 Base-TX
All-in-one functionsCopy, Fax, Scan
Color all-in-one functionscopy, print, scan
Standard interfacesEthernet, USB 2.0
USB 2.0 ports quantity1
Sound pressure level (printing)50 dB
Power consumption (standby)6 W
Power consumption (average operating)26 W
Market positioningHome & office

Related product manuals