Brother MFC-295CN User Manual

Chapter 10
64
Paper options 10
Paper Type 10
If you are copying on special paper, set the
machine for the type of paper you are using to
get the best print quality.
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Copy Options and a or b to
choose Paper Type.
Press OK.
e Press a or b to choose the type of paper
you are using (Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or Transparency).
Press OK.
f Press Black Start or Color Start.
Note
To change the default paper type setting
see Paper Type on page 22.
Paper Size 10
If copying on paper other than Letter size, you
will need to change the paper size setting.
You can copy on Letter, Legal, A4, A5 or
Photo 4 × 6in. (10× 15 cm) paper.
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Copy Options and a or b to
choose Paper Size.
Press OK.
e Press a or b to choose the size of paper
you are using Letter, Legal, A4, A5
or 4"(W)x 6"(H).
Press OK.
f Press Black Start or Color Start.
Note
To change the default paper size setting
see Paper Size on page 22.

Brother MFC-295CN Specifications

General

Print technology	Inkjet
Maximum resolution	6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	33 ppm
Print speed (color, normal quality, A4/US Letter)	27 ppm
Digital sender	No
Maximum duty cycle	2500 pages per month
Number of print cartridges	4
Image formats supported	BMP, PCX, PNG
Maximum scan resolution	19200 x 19200 DPI
Copy speed (black, normal quality, A4)	22 cpm
Copy speed (color, normal quality, A4)	20 cpm
Faxing	Mono faxing
Fax memory	200 pages
Modem speed	14.4 Kbit/s
Auto-redialing	Yes
Fax coding methods	JPEG, MH, MMR (Fax coding method), MR
Total input capacity	100 sheets
Total output capacity	50 sheets
Envelopes sizes	C5, DL
Maximum print size	216 x 356 mm
Non-ISO print media sizes	Executive
ISO A-series sizes (A0...A9)	A4
Supported network protocols (IPv4)	ARP, RARP, BOOTP, APIPA (Auto IP), NetBIOS/WINS, LPR/LPD, Custom Raw Port/Port9100, DNS Resolver, mDNS, FTP Server, TELNET, SNMPv1, TFTP, Scanner Port, LLTD responder, Web Services
Power requirements	AC 100-120V 50/60Hz
Networking features	10/100 Base-TX
All-in-one functions	Copy, Fax, Scan
Color all-in-one functions	copy, print, scan
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	1
Sound pressure level (printing)	50 dB
Power consumption (standby)	6 W
Power consumption (average operating)	26 W
Market positioning	Home & office