EasyManuals Logo
Home>Brother>All in One Printer>MFC-295CN

Brother MFC-295CN User Manual

Brother MFC-295CN
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
Chapter 5
32
Dual Access
(Black & White only) 5
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD shows the new job
number and available memory.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If the Out of Memory message appears
while scanning a document, press
Stop/Exit to cancel or Black Start to send
the scanned pages.
Real Time Transmission 5
When you are sending a fax, the machine will
scan the document into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialing and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can set
Real Time TX to On for all documents or
Next Fax Only for the next fax only.
Note
In Real Time Transmission, the automatic
redial feature does not work when you are
using the scanner glass.
If the memory is full, faxes from the
scanner glass cannot be sent until you
clear some of the memory.
(MFC-295CN)
If the memory is full and you are sending a
black and white fax from the ADF, the
machine will send the document in real time
(even if
Real Time TX
is set to
Off
).
Sending in real time for all faxes 5
a Make sure you are in Fax mode .
b Press Menu, 2, 2, 3.
3.Real Time TX
Realtime TX:On
c Press a or b to choose
Realtime TX:On or
Realtime TX:Off.
Press OK.
Sending in real time for the next fax
only
5
a Make sure you are in Fax mode .
b Press Menu, 2, 2, 3.
c Press a or b to choose
Next Fax Only. Press OK.
d Press a or b to choose Next Fax:Off
or Next Fax:On.
e Press OK.
Note
In real time transmission, the automatic
redial feature does not work when you are
using the scanner glass.

Table of Contents

Other manuals for Brother MFC-295CN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-295CN and is the answer not in the manual?

Brother MFC-295CN Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)33 ppm
Print speed (color, normal quality, A4/US Letter)27 ppm
Digital senderNo
Maximum duty cycle2500 pages per month
Number of print cartridges4
Image formats supportedBMP, PCX, PNG
Maximum scan resolution19200 x 19200 DPI
Copy speed (black, normal quality, A4)22 cpm
Copy speed (color, normal quality, A4)20 cpm
FaxingMono faxing
Fax memory200 pages
Modem speed14.4 Kbit/s
Auto-redialingYes
Fax coding methodsJPEG, MH, MMR (Fax coding method), MR
Total input capacity100 sheets
Total output capacity50 sheets
Envelopes sizesC5, DL
Maximum print size216 x 356 mm
Non-ISO print media sizesExecutive
ISO A-series sizes (A0...A9)A4
Supported network protocols (IPv4)ARP, RARP, BOOTP, APIPA (Auto IP), NetBIOS/WINS, LPR/LPD, Custom Raw Port/Port9100, DNS Resolver, mDNS, FTP Server, TELNET, SNMPv1, TFTP, Scanner Port, LLTD responder, Web Services
Power requirementsAC 100-120V 50/60Hz
Networking features10/100 Base-TX
All-in-one functionsCopy, Fax, Scan
Color all-in-one functionscopy, print, scan
Standard interfacesEthernet, USB 2.0
USB 2.0 ports quantity1
Sound pressure level (printing)50 dB
Power consumption (standby)6 W
Power consumption (average operating)26 W
Market positioningHome & office

Related product manuals