Page 6
a
a
b
b
c
c
d
e
f
OPERATING CONTROLS
OPERATING CONTROLS
(a) BATCH SELECTOR PADS
Pressing the pad corresponding to the Small, Medium, or Large batch selects the amount of coffee to be
brewed. Pressing a different pad after a brew cycle has been initiated does not change the brew batch in prog-
ress. Light indicates the selected batch to brew.
(b) ON/OFF PAD
Pressing the ON/OFF pad alternately turns the brewing side on and off. Pressing this pad during the brew
cycle will interrupt the brew cycle, stopping the fl ow of water. Pressing this pad during the programming of the
brewer will exit the setup and return to the main screen.
(c) BREW PAD
Momentarily pressing and releasing this pad begins a brew cycle.
(d) PROGRAM PAD
Pressing and holding the upper right hidden switch allows entry to the programming menus. Pressing and
releasing the switch steps through each function screen during programming.
(e) FUNCTION SCREEN
This is the display which shows the various functions of the brewer and allows the programming to be ac-
complished.
(f) FUNCTION SCREEN PADS
These are the hidden pads which are used to program the brewer.
(g) FUNNEL SENSING COILS
These are used to "receive" information from the Smart Funnel handle (coffee name and batch size), and also
from RECIPE CARDS.
(h) SCROLL BACKWARDS
The upper left hidden switch can be used to scroll backwards through the function list.
g
g
h
P3339.25
29877.2 121504
To Next Page
Loading...
Need help?
General
