Bunn SINGLE SH DBC Operating Manual

Page 30
BREW COUNTERS
This function allows the operator to track the
number of brew cycles completed. There is one
resettable counter, and one life counter that is not
resettable.
Procedures to view/reset the brew counters:
1. Press and hold the ® pad until the display reads
SET NEW RECIPES. Release the ®. Press and
release the ® pad until the display reads BREW
COUNTERS.
2. Pressing NO in this screen will advance to the next
function. Press YES to view the first brew counter.
This number represents the brew cycles initiated
since that counter was last reset.
3. To reset the resettable counter to zero press and
release RESET when viewing that particular
counter's screen.
4. To advance to the other counter, press and release
NEXT. This will advance to total brews (non-
resettable).
5. When finished, press NEXT until the display reads
BREW COUNTERS. Press and release NO to ad-
vance to the next function screen, or press the
pad on the front switch panel to exit the BREW
COUNTERS function and return to the MAIN
SCREEN.
P2448
FUNNEL DETECT ?
Procedure to set funnel detect:
1. Press and hold the ® pad until the display reads
SET NEW RECIPES. Release the ®. Press and
release the ® pad until the display reads FUNNEL
DETECT.
2. NO or YES should be flashing to indicate the
current setting.
3. Select YES to prevent brewing if a Smart Funnel
®
is not correctly situated in the rails. If this function
is activated and a brew cycle is attempted with the
funnel not properly situated, the display will read,
FUNNEL NOT IN PLACE, until one is in place.
4. Select NO to allow brewing without a Smart Fun-
nel
®
in place. This is selected when brewing with
a funnel other than a Smart Funnel
®
(a regular
brew funnel).
5. When finished, press and release DONE. This will
retain the changes, exit this function screen and
advance to the next. Another alternative is to press
the pad located on the front switch panel to
exit the FUNNEL DETECT and return to the MAIN
SCREEN.
P2309
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
FUNNEL DETECT (optional)
This function allows the operator to prevent the
start of a brew cycle if a Smart Funnel
®
is not posi-
tioned correctly in the funnel rails.
34025 022403

Bunn SINGLE SH DBC Specifications

General

Brand	Bunn
Model	SINGLE SH DBC
Category	Coffee Maker
Language	English