2.0 11/2012 © CAME cancelli automatici s.p.a.
EN
Legend
This symbol indicates sections to be read with
particular care.
⚠
This symbol indicates sections concerning safety.
☞ This symbol indicates notes to communicate to
users.
Description
Engineered and built entirely by Came Cancelli Automatici
S.p.A.
The control panel is powered by 230 v AC on terminals L
and N with max frequency of 50/60 Hz.
The command devices and accessories are powered by 24
V.
Warning!The accessories must not exceed 20 W overall.
All connections are protected by quick fuses, see table.
he card provides and controls the following functions:
- automatic closing after an opening command;
- maintained action command.
The available command modes are:
- opening/closing;
- total stop.
The photocells, after detecting an obstacle, may trigger:
- the reopening of the closing gate;
- a total stop.
Special trimmers regulate:
- the time for automatic closing activation;
- the sensitivity for obstacle detection, during movement:
min/max;
- the automatic safety’s intervention time: min/max.
You can also connect:
- gate open warning-lamp o, in alternative, an electric lock;
- courtesy -lamp lighting the parking area for opening/
closing cycle.
Destination
The ZE5 electrical panel is designed to control EMEGA
(E306-E456) automation units in the movement of garage-
type doors with double or single motor.
The use of this product for purposes other than as
described above and installation executed in a manner
other than as instructed in this technical manual are
prohibited.
Limits of Use
The overall power of the motors must not exceed 300 W
400 W.
To Next Page
Loading...
Need help?
General
