High ............. Brighter than the Normal mode.
Normal ......... Normal brightness
Eco .............. Lower brightness reduces the lamp
power consumption and extends the
lamp life.
Using the remote control unit for some frequently used operations is advisable. Just pressing one of the buttons enables
you to make the desired operation quickly without calling up the On-Screen Menu.
Press the COMPUTER 1/2, VIDEO, S-VIDEO and
COMPONENT buttons on the remote control unit to
select the input source. See pages 30, 41-42 for details.
Display the input source information: ,
, , , Language, ,
, , ,
and (p.64)
Press the D.ZOOM buttons on the remote control unit to
enter to the Digital zoom +/– mode. See pages 38,40 for
details.
See the next page for the description of
other buttons.
Press the LAMP button on the remote control unit to
select the lamp mode for changing the brightness on the
screen.
Press the FREEZE button on the remote control unit to
freeze the picture on the screen, meanwhile, volume is
muted. To cancel the Freeze function, press the FREEZE
button again or press any other button.
Fig.1 will appear on the screen while the Freeze function
is working.
Fig.1
FREEZE
D.ZOOM
VIDEO
LAMP
To Next Page
Loading...
Need help?
General
